paver sealing

Concrete Sealers

Why Choose Armourtech Concrete Sealer To Seal and Protect Your Concrete?
Environmentally and User friendly – Suitable for DIY use or Professional Contractors Armourtech DPS101 concrete Sealer is Water Based, Safe and Easy to use.
Permanent – Armourtech DPS101 unique formula penetrates and “fuses” permanently to concrete.
Proven History – Armourtech DPS101 concrete sealer was developed for concrete sealing through concrete technology research and many years of proven performance. IT WORKS!
Versatility – Armourtech DPS101 concrete Sealer is ideal for industrial and domestic use, from a sky tower to a driveway from a tunnel to a polished floor.

We deliver to customers throughout both the North Island and South Island.
Concrete sealing and weather proofing can provide considerable protection to your concrete asset and enhance its life and looks.
Armourtech Concrete Sealer solves the damaging problems caused by:
Damp, Water Migration and Erosion, Staining, Mold, Mildew, Salt Erosion, Animal Excrement,
Freeze/Thaw, Concrete Dusting, Spalling and Efflorescence

Armourtech DPS101 concrete sealer is designed for sealing concrete of all forms including the following:
Floor Sealing – ground concrete, coloured concrete, warehouses, offices, cafes, workshops, concrete floors
Housing – plaster, masonry, concrete brick, concrete block, stucco, Hinuera stone, basements, concrete tiles
Domestic/Landscape – concrete driveways, concrete pavers, patios, concrete floors, concrete block, concrete brick
Construction – precast concrete, tilt panels, marinas, buildings & structures, animal shelters & cow sheds
Architectural – historic concrete structures, specialty finishes.
Armourtech DPS101 concrete sealer helps stop water, oil, grease, salts and other fluids from damaging concrete.
Armourtech DPS101 concrete sealer allows floor coverings/adhesives to be installed and paint/coatings to be applied.
Armourtech DPS101 concrete sealer is supplied throughout NZ to DIY users and Contractors. Advice and support for Designers [...]

By |March 7th, 2013||Comments Off on Concrete Sealers|

Home

The BEST solutions for
Concrete Polishing Concrete Sealing  and Concrete Placing

Armourtech products are New Zealand manufactured!
For Concrete Treatment products you can trust, use the Armourtech range ‘THEY WORK’.
Contact us: info@nzisl.co.nz or call 021 509115
We serve customers throughout New Zealand and the Pacific Islands.

Select and view the information you require and see why Armourtech is the right Concrete Treatment Solution for you…

Polishing & Sealing Placing
Qty Calculator
Polishing & Sealing Placing

Feed back from a customer…..I loved your product..so easy to use, no fumes and the finish is exactly as you claim……I spent $2500 doing the front half of the shop floor with vinyl,,, when I could have got an equally good finish for a fraction of that using your product… JT
Polished Concrete Floors breakthrough ARMOURTECH Floor technology offers  finish options to suit any budget and look preference. Achieve a higher grit shine with lower grit abrasives so less grinding means less cost.
Concrete Sealer  Armourtech DPS 101 is suitable for Professionals and DIY users for residential, commercial and industrial applications from a Sky Tower to a Driveway from a Tunnel to a Polished Floor. Armourtech DPS101 concrete sealer  is extremely versatile and effective,water based, safe and easy to use with a proven history. IT WORKS!!!
Concrete Placing and Curing with ARMOURTECH PRO Float Curing and Troweling aid. This is a Breakthrough product and must be seen to be believed.
ARMOURTECH PRO Float adds long term benefits to finished concrete while saving time and costs in placing the concrete and increasing the options available for decorative finishes.
We also offer free advice to designers, architects, consultants, contractors and owners, contact us today.

ARMOURTECH Products are advancing concrete flooring [...]

By |August 30th, 2012||Comments Off on Home|

Technical Data

Network of Applicators New Zealand wide available.

Contact us to find an applicator in your area New Zealand wide
Armourtech DPS101 Concrete Sealer MSDS

 
Application Guide

 
Armourtech DPS101 Specification

By |February 21st, 2012||Comments Off on Technical Data|

Healthy Homes

Radon Gas – What is it?
Radon is an invisible and odorless radioactive gas is produced by the natural disintegration of radioactive heavy metals uranium and thorium, which are dispersed throughout the Earth’s crust.
Uranium and its daughter products radium and radon, are found in nearly all rocks and soils.
Most contain only 1 to 3 parts per million (ppm) of uranium, but some, like granites, dark shales, light-colored volcanic rocks, and sedimentary rocks with phosphate, may contain as much as 100 ppm. Thorium, which is even more common, also produces radium.
Radon gas naturally moves into the permeable disturbed soil and the gravel bed surrounding foundations and then, into the buildings through openings and pores in concrete. Radon from soil is by far the main source of indoor radon.

Building materials like rocks, bricks, and concrete also give off radon. They produce Radon-222 and Thoron (Radon-220), but only 0.1 – 0.3 pCi/L each in a typical basement.
Radon is soluble in water and also gets indoors by “water migration”. Water is drawn indoors by the capillary action of the pores in concrete or pushed by hydrostatic pressure (seepage).
The higher temperature and lower pressure indoors release the gas. The typical basement or slab lets in 35 or 50 ltrs of water and vapor each day. Radon from outside air also settles in basements, because it is nine times heavier than air.

In the US the target of the Radon Abatement Act is the natural level outdoors (average 0.4 pCi/L). Radon is the most potent carcinogen in our homes and buildings you cannot see radon gas and you cannot smell it or taste it. Radon is a [...]

By |February 19th, 2012||Comments Off on Healthy Homes|

Moisture

Water & water-vapour transmission has been a major concern for designers and owners in the construction industry for many years.

Do you experience any of the following?

Controlling Moisture Transmission
By creating a permanent chemical fusion within the concrete that seals the capillaries and channels for moisture migration  vapour transmission can be reduced to 2% (allowing concrete to endure freeze/thaw). Through this process the alkali is locked up preventing efflorescence (concrete cancer), it also prevents water seepage, water vapor migration, condensation, molds, mildew, and musty odors. Reduces cracking, densifies and hardens the concrete and also allows for application of adhesives, paints and coatings, preventing flaking and peeling.

Grouting
The grouting in a concrete block construction is the most vulnerable site for moisture ingress as unless a non shrink grout is used the std mortar mix grout will shrink and crack and allow moisture ingress. This is the most common point of moisture intrusion in concrete block construction and Armourtech DPS will not bridge the gap left by shrinkage and mortar cracking.

Armourtech Concrete Sealer should be considered as a vital aspect of any concrete project to prevent the damaging effects of moisture migration and vapour transmission. Armourtech Concrete Sealer will increase durability and reduce cost.

By |February 19th, 2012||Comments Off on Moisture|

Benefits

Benefits of Armourtech Concrete Sealer

Armourtech Concrete Sealer is specifically engineered to solve the damaging problems caused by:
Water migration and erosion – Staining – Mould, Mildew, Algae, Bacteria – Salt Erosion – Oils – Traffic – Animal Excrement – Freeze/Thaw – Concrete Dusting – Spalling – Efflorescence

 
When applied and in full accordance with the manufacturer’s instructions and recommendations Armourtech DPS101 will provide for the following:
Armourtech DPS101 forms a permanent molecular bond with the Calcium Hydroxide and directly with Silica content in the Concrete. This bond strengthens the surface, blocks surface moisture intrusion, blocks subterranean moisture intrusion, and keeps stains topical. The bond is permanent whilst the substrate and surface remains intact.

Armourtech Concrete Sealer is engineered for use on cementious substrates, is unique in function, waterborne, non toxic, non hazardous, single application and is suitable for internal and external applications, new or old concrete, vertical and horizontal applications.

Armourtech Concrete Sealer is an advanced technology concrete sealer for: Coloured Concrete – Driveways – Pre-cast – Concrete Floor Sealing – Grind & Seal- Plaster Homes – Masonry – Pavers – Concrete Bricks – Stamped Concrete – Concrete Ornamental’s, Concrete Bench Tops – Historical Structures – Any Concrete

By |February 19th, 2012||Comments Off on Benefits|

A Concrete Decision

Concrete sealing and weatherproofing can provide considerable protection to your concrete asset and enhance its life and looks. However the wrong solution choice can also lessen the value, beauty and performance of the concrete and increase maintenance costs.
When looking for a concrete sealer solution, identify at least the following:

What is the desired end result?

Is the concrete sealer proven with research and technical support?

What is the life expectancy of the finished result?

Is the concrete sealer environmentally friendly?

Is the application methodology of the concrete sealer simple and proven?

Armourtech Concrete Sealer is globally recognized and developed for concrete sealing through concrete technology research and many years of proven performance.
Armourtech Concrete Sealer should be considered as a vital aspect of any concrete sealing project weather it be a sky tower, bridge, airport runway, polished floors, patio pavers or even a bird bath.

By |February 19th, 2012||Comments Off on A Concrete Decision|

Contact Us

Email: info@nzisl.co.nz
or call 021 509 115 

//
//

By |February 19th, 2012||Comments Off on Contact Us|