PRO Float on NZ’s largest current pour
A Real Game Changer in Concrete Finishing. Better Concrete Happens with ARMOURTECH PRO Float
SAVE at LEAST 50% of the costs of other methods to Concrete Finishing and produce a Densified/Hardened, Abrasion Resistant, and Dust proofed concrete surface at time of placement. PRO Float will also significantly reduce the cost of producing a decorative or polished floor.

Makes extra water unnecessary

Eliminates the costs and hassle of water curing

Increases compressive strength by up to 30%

Increases abrasion resistance

Speeds Concrete Finishing – no sheeting, or setting up sprinklers etc

Extends work ability time in hot, & windy conditions by 15 to 30 min to allow proper close

Helps Concrete Finishing under hot, dry, sunny & windy conditions

Minimizes checking, crazing & scaling, Eliminates dusting, Reduces potential for slab curling

Decreases potential for alkali silica reaction (ASR)

Reduces operator fatigue and trowel wear – reduces consumable & labour costs

Creates a denser, less permeable surface for resistance to liquid penetration, staining

Coverage = approx 24m2 per ltr

No need to go back and seal however it is advised due to the creation of additional Ca(OH)2 during the curing process at full cure to apply ARMOURTECH  Densifier which will self bond directly with the PRO Float increasing concrete density
AMAZING! Check out POWER TROWEL finishing using ARMOURTECH Floor.

PRO Float  Floor just Burnished

This game-changing product utilizing Colloidal Silica has major benefits during concrete finishing, and it improves the quality of the resulting slab.PRO Float is being used successfully on NZ’s current largest pour of 60000m2.
Armourtech PRO Float is simply spray applied at the Floating in stage so no extra labour units required.
Armourtech PRO Float is the Concrete Designers and Concrete Placers New Best Friend.
Armourtech PRO Float “It’s like [...]