PRO Float on NZ’s largest current pour
A Real Game Changer in Concrete Finishing. Better Concrete Happens on ARMOURTECH PRO Float. Most Innovative Product at WOC 2013.
SAVE at LEAST 50% of the costs of other methods to Concrete Finishing and produce a Densified/Hardened, Abrasion Resistant, and Dust proofed concrete surface at time of placement. PRO Float will also significantly reduce the cost of producing a decorative or polished floor.
Makes extra water unnecessary
Eliminates the costs and hassle of water curing
Increases compressive strength by up to 30%
Increases abrasion resistance
Speeds Concrete Finishing – no sheeting, or setting up sprinklers etc
Extends work ability time in hot, & windy conditions by 15 to 30 min to allow proper close
Helps Concrete Finishing under hot, dry, sunny & windy conditions
Minimizes checking, crazing & scaling, Eliminates dusting, Reduces potential for slab curling
Decreases potential for alkali silica reaction (ASR)
Reduces operator fatigue and trowel wear – reduces consumable & labour costs
Creates a denser, less permeable surface for resistance to liquid penetration, staining
Coverage = approx 24m2 per ltr
No need to go back and seal however it is advised due to the creation of additional Ca(OH)2 during the curing process at full cure to apply ARMOURTECH Densifier which will self bond directly with the PRO Float increasing concrete density
PRO Float Floor just Burnished
This game-changing product utilizing Colloidal Silica has major benefits during concrete finishing, and it improves the quality of the resulting slab.PRO Float is being used successfully on NZ’s current largest pour of 60000m2.
PRO Float is simply spray applied at the Floating in stage so no extra labour units required.PRO Float is the Concrete Designers and Concrete Placers New Best Friend.PRO Float “It’s like having an extra finisher” Easier Troweling, More Working Time.PRO [...]